“Quiet” Solutions

Acoustical Wall Panels – Quiet SolutionsTM

Quiet SolutionsTM offers a wide variety of products to meet the acoustical needs of virtually any space. Our innovative products include treatments for both walls and ceilings, reflective or absorptive, and can be combined to solve or correct any acoustical problems. Our products are manufactured to meet the specific requirements of your space. We custom manufacture each of our products for size, thickness and acoustical properties desired. With our totally customized products, we can help you create a special environment that is best suited for your needs. Our high performance products give you a rich looking environment while reducing distracting noises.

Use the tabs below to learn more about our acoustical wall panels:

Standard Absorptive

Standard Absorptive

This multi-purpose panel is ideal for use on walls or ceilings. It is the most commonly used panel for the absorption of sound.

  • Construction: 6PCF glass fiber core, reinforced edge protection, full fabric or vinyl wrap.
  • Thickness and NRC Ratings: 1/2″ 10PCF (.55-.65), 1″ (.80-.90), 1 1/2″ (.90-1.00), 2″ (1.10).

Impact Resistant

Impact Resistant

This panel is designed for high traffic areas where impact resistance is required, i.e. lobbies, corridors or other areas prone to high abuse. In addition to excellent acoustical values, this panel also offers a tackable surface.

  • Construction: 6PCF glass fiber core laminated with 1/8″, 16-20PCF high density impact resistant glass fiber board, full fabric or vinyl wrap.
  • Thickness and NRC Ratings: 5/8″, 1 1/8″ (.90-1.00), 1 5/8″, 2 1/8″ (1.15).

Reflective

Reflective

This panel is used in areas where a variety of acoustical conditions is desired. It is commonly used when reflective sound in combination with absorption is required such as in sound studios, auditoriums and theaters.

  • Construction: Optional core material, full fabric or vinyl wrap.
  • Thickness: 1/2″, 5/8″, 3/4″, 1″, 1 1/2″, 2″.

Tackable

Tackable

This durable panel is ideal for areas where an economical, custom tack surface is required.

  • Construction: Mineral fiber core, full fabric or vinyl wrap.
  • Thickness: 3/8″, 1/2″, 3/4″, 1″.



Ultra I

Ultra I

A multi-purpose panel designed for use in extremely high abuse applications requiring high sound absorption.

  • Construction: 6PCF glass fiber core with chemically hardened edges. The glass fiber core is faced with an acoustically transparent, 0.040″ thick, (22%) open perforated, rigid, abuse resistant vinyl sheet. The composite core is wrapped with fabric. Maximum panel size of 48″x120″ with custom sizes available.
  • Thickness and NRC Ratings: 1 1/16″, 2 1/16″, (.95-1.15).

Specifications – Wall Panels

General

  • All Quiet SolutionsTM Wall Panels should be installed in accordance with the manufacturer’s recommendations.
  • All necessary hardware and accessories for a complete job installation are to be furnished by the contractor.
  • Installation of wall Panels should not begin until all wet work, such as plastering, concrete, etc. is completely dry. The panels are designed for installation under standard occupancy conditions from 60°F to 85°F and not at more than 80% R.H. in an enclosed building.
  • The Contractor shall be responsible for the examination and acceptance of all surfaces and conditions prior to the acoustical wall panel installation.

Materials

  • The Wall Panels are pre-finished “Quiet Solutions” by Acoustics Associates, Inc.
  • Core material will be the exact height, width, and shape detailed on the drawings
  • Edge detail can be square, radius, bevel, half bevel or custom
  • Wall panels will be mounted using Edge detail such as:
    • Hook and loop fastener
    • Mounting adhesive
    • Mechanical chip
    • Concealed spines
    • Impaling clip
  • Wall panels have a desired Noise reduction Coefficient (N.R.C.) using ASTM C423-81a. Sound absorption and sound absorption coefficients by the Reverberation Room Method.
  • All components utilized in the construction of these wall panels meet class I (0-25) rating as tested per ASTM E-84a. Surface burning characteristics of building materials.

Specifications – Ceilings, Baffles, Ceiling Clouds

General

  • All Quiet SolutionsTM Ceilings, Baffles, and Ceiling Clouds should be installed in accordance with the manufacturer’s recommendations.
  • All necessary hardware and accessories for a complete job installation are to be furnished by the contractor.
  • Installation of Ceilings, Baffles and Ceiling Clouds shall not begin until all wet work, such as plastering concrete, etc. is completely dry. The panels are designed for installation under standard occupancy conditions from 60°F to 85°F and not at more than 80% R.H. in an enclosed building.
  • The Contractor shall be responsible for the examination and acceptance of all surfaces and conditions prior to the ceiling, baffle and ceiling cloud installation.

Materials

  • All Ceilings, Baffles and Ceiling Clouds shall be pre finished “Quiet Solutions” by Acoustics Associates, Inc
  • Core material will be the exact height, width, and shape detailed on the drawings
  • Ceilings, Baffles and Ceiling Clouds have a desired Noise reduction Coefficient (N.R.C.) by using ASTM C423-81a. Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
  • All components utilized in the construction of these wall panels meet class I (0-25) rating as tested per ASTM E-84a. Surface Burning Characteristics of Building Materials.
Comments are closed.